Nqa Commands; Nqa Client Commands; Advantage-Factor; Codec-Type - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

NQA commands

NQA client commands

advantage-factor

Use advantage-factor to configure the advantage factor that is used to count Mean Opinion Scores
(MOS) and Calculated Planning Impairment Factor (ICPIF) values.
Use undo advantage-factor to restore the default.
Syntax
advantage-factor factor
undo advantage-factor
Default
The advantage factor is 0.
Views
Voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
factor: Specifies the advantage factor in the range of 0 to 20.
Usage guidelines
The evaluation of voice quality depends on users' tolerance for voice quality. For users with higher
tolerance for voice quality, use the advantage-factor command to configure the advantage factor. When
the system calculates the ICPIF value, the specified advantage factor is subtracted to modify ICPIF and
MOS values so that both the objective and subjective factors are considered when you evaluate voice
quality.
Examples
# Configure the advantage factor for voice operations as 10.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type voice
[Sysname-nqa-admin-test-voice] advantage-factor 10

codec-type

Use codec-type to configure the codec type for a voice operation.
Use undo codec-type to restore the default.
12