Terminal Monitor - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

of the logs that can be output to the current terminal to 6 (informational), logs with a severity value from
0 to 6 will be output.
The configuration of this command is valid for only the current connection between the terminal and the
device. If a new connection is established, the display of logs on the terminal restores the default.
Examples
# Set the lowest level of the logs that can be output on the monitor terminal to 7 (Debugging).
<Sysname> terminal logging level 7

terminal monitor

Use terminal monitor to enable the monitoring of logs on the current terminal.
Use undo terminal monitor to disable the monitoring of logs on the current terminal.
Syntax
terminal monitor
undo terminal monitor
Default
Monitoring of logs is enabled on the console and disabled on the monitor terminal.
Views
User view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The configuration of this command is valid for only the current connection between the terminal and the
device. If a new connection is established, the monitoring of system information on the terminal restores
the default.
Examples
# Enable the monitoring of logs on the current terminal.
<Sysname> terminal monitor
Current terminal monitor is on.
235

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents