Rmon Statistics - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

The last number in the OID forms of variables must be the same as the statistics entry index for the
interface. For example, if you execute the rmon statistics 5 command, you must replace
1.3.6.1.2.1.16.1.1.1.6.1 and 1.3.6.1.2.1.16.1.1.1.5.1 with 1.3.6.1.2.1.16.1.1.1.6.5 and 1.3.6.1.2.1.16.1.1.1.5.5,
respectively.
Related commands
display rmon prialarm
•
rmon event
•

rmon statistics

Use rmon statistics to create an entry in the RMON statistics table.
Use undo rmon statistics to remove an entry from the RMON statistics table.
Syntax
rmon statistics entry-number [ owner text ]
undo rmon statistics entry-number
Default
No entry exists in the RMON statistics table.
Views
Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
entry-number: Specifies a statistics entry index in the range of 1 to 65535.
owner text: Specifies the entry owner, a case-sensitive string of 1 to 127 characters. The string can
contain spaces, but it cannot contain the question mark (?) or any unprintable control characters in the
US ASCII character set.
Usage guidelines
You can create one statistics entry for each interface, and up to 100 statistics entries on the device.
Each RMON statistics table entry provides a set of cumulative traffic statistics collected up to the present
time for an interface. Statistics include number of collisions, CRC alignment errors, number of undersize
or oversize packets, number of broadcasts, number of multicasts, number of bytes received, and number
of packets received. The statistics are cleared at a reboot.
To display the RMON statistics table, use the display rmon statistics command.
Examples
# Create an RMON statistics entry with an index 20 and the owner user1 for GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] rmon statistics 20 owner user1
176