Rmon History - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Parameters
entry-number: Specifies an event entry index in the range of 1 to 65535.
description string: Configures an event description, a case-sensitive string of 1 to 127 characters. The
string can contain spaces, but it cannot contain the question mark (?) or any unprintable control
characters in the US ASCII character set.
log: Logs the event when it occurs.
log-trap: Logs the event and sends an SNMP notification when the event occurs.
security-string: Represents the SNMP community name, a case-sensitive string of 1 to 127 characters. The
string can contain spaces, but it cannot contain the question mark (?) or any unprintable control
characters in the US ASCII character set.
none: Performs no action when the event occurs.
trap: Sends an SNMP notification when the event occurs.
owner text: Specifies the entry owner, a case-sensitive string of 1 to 127 characters. The string can
contain spaces, but it cannot contain the question mark (?) or any unprintable control characters in the
US ASCII character set.
NOTE:
The SNMP community name setting for the
can configure it with the command. Instead, the system uses the settings you configure with SNMP when
it sends RMON SNMP notifications. For more information about SNMP notifications, see
Management and Monitoring Configuration Guide
Usage guidelines
You can create up to 60 event entries.
You can associate an event entry with a standard or private alarm entry to specify the action to take when
an alarm condition occurs. Depending on your configuration, the system can log the event, send an
SNMP notification, do both, or do neither.
You can associate an event with multiple alarm entries.
Examples
# Create event 10 in the RMON event table.
<Sysname> system-view
[Sysname] rmon event 10 log owner user1
Related commands
display rmon event
rmon alarm
rmon prialarm

rmon history

Use rmon history to create an entry in the RMON history control table.
Use undo rmon history to remove an entry from the RMON history control table.
security-string
argument does not take effect even though you
.
172
Network

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents