chassis chassis-number slot slot-number: Specifies a card on an IRF member device. Without this option,
the command displays process statistics for the global active MPU. (In IRF mode.)
If you do not specify the dumbtty keyword, the command displays process statistics in an interactive
mode. In this mode, the system automatically determines the number of displayed processes according
to the screen size, and does not display exceeding processes. You can also input interactive commands
as shown in
Table 65 Interactive commands
? or h
# Display process statistics in dumbtty mode. In this mode, the system displays process statistics once,
and then returns to command view.
<Sysname> monitor process dumbtty
76 processes; 103 threads; 687 fds
Thread states: 1 running, 102 sleeping, 0 stopped, 0 zombie
CPU states: 77.16% idle, 0.00% user, 14.96% kernel, 7.87% interrupt
Memory: 496M total, 341M available, page size 4K
to perform relevant operations.
Displays help information that includes available interactive commands.
Sorts processes by CPU usage in descending order, which is the default setting.
Sets the interval for refreshing process statistics, in the range of 1 to 2147483647 seconds.
The default value is 5 seconds.
Sorts processes by the number of open files in descending order. Files are identified by file
Kills a process. Because the command can impact system operation, be cautious to use it.
Refreshes the screen.
Sorts processes by memory usage in descending order.
Changes the maximum number of processes displayed within a screen, in the range of 0 to
2147483647. The default value is 10. A value of 0 means no limit. Only processes not
exceeding the screen size can be displayed.
Quits the interactive mode.
Sorts processes by running time in descending order.
Moves sort field to the next left column.
Moves sort field to the next right column.