Snmp-Agent Sys-Info Location; Snmp-Agent Sys-Info Version - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

<Sysname> system-view
[Sysname] snmp-agent sys-info contact Dial System Operator # 27345
Related commands
display snmp-agent sys-info

snmp-agent sys-info location

Use snmp-agent sys-info location to configure the system location.
Use undo snmp-agent sys-info location to restore the default location.
Syntax
snmp-agent sys-info location sys-location
undo snmp-agent sys-info location
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
sys-location: Specifies the system location, a string of 1 to 255 characters.
Usage guidelines
Configure the location of the device for system maintenance and management.
Examples
# Configure the system location as Room524-row1-3.
<Sysname> system-view
[Sysname] snmp-agent sys-info location Room524-row1-3
Related commands
display snmp-agent sys-info

snmp-agent sys-info version

Use snmp-agent sys-info version to enable SNMP versions.
Use undo snmp-agent sys-info version to disable SNMP versions.
Syntax
In non-FIPS mode:
snmp-agent sys-info contact version { all | { v1 | v2c | v3 } * }
undo snmp-agent sys-info version { all | { v1 | v2c | v3 } * }
In FIPS mode:
snmp-agent sys-info version v3
undo snmp-agent sys-info version v3
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents