Download  Print this page

Info-center Enable - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing.
Hide thumbs

Advertisement

Parameters
all-port-powerdown: Shuts down all the service ports on the device when the last log file is full or the
storage device runs out of space.
Usage guidelines
This command is supported only in FIPS mode.
The device supports up to 20 log files. With log file overwrite-protection disabled, when the twentieth log
file is full or the storage device runs out of space, the device deletes the oldest log file and creates a new
one.
With log file overwrite-protection enabled, when the twentieth log file is full or the storage device runs out
of space, the device stops saving logs into the log files.
Examples
# Enable log file overwrite-protection.
<Sysname> system-view
[Sysname] info-center logfile overwrite-protection

info-center enable

Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Information center is enabled.
info-center format
Use info-center format to set the format of logs sent to a log host.
Use undo info-center format to restore the default.
215

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: