Snmp-Agent Log - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Examples
# Change the local engine ID to 123456789A.
<Sysname> system-view
[Sysname] snmp-agent local-engineid 123456789A
Related commands
display snmp-agent local-engineid
snmp-agent usm-user

snmp-agent log

Use snmp-agent log to enable logging SNMP operations.
Use undo snmp-agent log to disable logging SNMP operations.
Syntax
snmp-agent log { all | get-operation | set-operation }
undo snmp-agent log { all | get-operation | set-operation }
Default
SNMP logging is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Enables logging SNMP Get and Set operations.
get-operation: Enables logging SNMP Get operations.
set-operation: Enables logging SNMP Set operations.
Usage guidelines
Use SNMP logging to record the SNMP operations performed on the SNMP agent for auditing NMS
behaviors. The SNMP agent sends log data to the information center. You can configure the information
center to output the data to a specific destination as needed.
Examples
# Enable logging SNMP Get operations.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging SNMP Set operations.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
139

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents