Resolve-Type - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Predefined user roles
network-admin
mdc-admin
Parameters
domain-name: Specifies the domain name to be resolved. It is a dot-separated case-insensitive string of
1 to 255 characters including letters, digits, and hyphens (-) , and underscores (_) (for example,
aabbcc.com). Each part consists of 1 to 63 characters. Consecutive dots (.) are not allowed.
Examples
# Set the domain name domain1 to be resolved.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dns
[Sysname-nqa-admin-test-dns] resolve-target domain1
# In DNS template view, set the domain name domain1 to be resolved.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] resolve-target domain1

resolve-type

Use resolve-type to configure the domain name resolution type.
Use undo resolve-type to restore the default.
Syntax
resolve-type { A | AAAA }
undo resolve-type
Default
The domain name resolution type is type A.
Views
DNS template view
Predefined user roles
network-admin
mdc-admin
Parameters
A: Specifies the type A queries. A type A query resolves a domain name to a mapped IPv4 address.
AAAA: Specifies the type AAAA queries. A type AAAA query resolves a domain name to a mapped
IPv6 address.
Examples
# In DNS template view, configure the domain name resolution type as AAAA.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
67