Event Syslog - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Views
CLI-defined policy view
Predefined user roles
network-admin
mdc-admin
Parameters
oid oid: Specifies the OID of the monitored MIB variable, a string of 1 to 256 characters.
oid-val oid-val: Specifies the threshold to be compared with the sampled value. The oid-val argument can
be any data type supported by SNMP, including numerals and character strings. The CLI online help
system displays the value range as character strings of 1 to 512 characters. If the threshold value contains
spaces, you must enclose the value in quotation marks (" ").
op op: Specifies the operator for comparing the sampled value with the threshold. The policy is executed
if the comparison result meets the condition. For keywords available for the start-op argument, see
52.
drop: Drops the notification if the comparison result meets the condition. If this keyword is not specified,
the system sends the notification.
Usage guidelines
Use SNMP_Notification event monitor policies to monitor variables in SNMP notifications.
EAA executes an SNMP_Notification event monitor policy when the value of the monitored variable in
an SNMP notification meets the specified condition.
You can configure only one event for one monitor policy. If the monitor policy already contains an event,
the new event replaces the old event.
Examples
# Configure a CLI-defined policy to monitor SNMP notifications that contain the variable OID
1.3.6.1.4.1.318.2.8.3. Enable the system to drop an SNMP notification and execute the policy if the
variable in the notification contains the "UPS:Returned from battery backup power" string.
<Sysname> system-view
[Sysname] rtm cli-policy snmp_notification
[Sysname-rtm-snmp_notification] event snmp-notification oid 1.3.6.1.4.1.318.2.8.3
oid-val "UPS:Returned from battery backup power" op eq drop

event syslog

Use event syslog to configure a Syslog event for a CLI-defined monitor policy.
Use undo event to delete the event in a CLI-defined monitor policy.
Syntax
event syslog priority level msg msg-body occurs times period period
undo event
Default
No log event is configured.
249
Table

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents