Download Print this page

HP FlexFabric 12500 Series Network Management And Monitoring Command Reference: Mirroring-group Monitor-port (interface View)

Routing.
Hide thumbs

Advertisement

Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
group-id: Specifies the number of a mirroring group, in the range of 1 to 64. The mirroring group
specified by the group-id argument must already exist.
vlan-list: Specifies the source VLAN list, containing one or more VLANs, in the format of vlan-list =
{ vlan-id [ to vlan-id ] }&<1-8>. The vlan-id specifies the ID of the VLAN, in the range of 1 to 4094. &<1-8>
indicates that you can specify up to eight vlan-id [ to vlan-id ] parameters. When you use to to specify a
VLAN ID range, the end VLAN ID must be equal to or greater than the start VLAN ID.
both: Mirrors both received and sent packets on the ports in the source VLANs.
inbound: Mirrors only packets received by the ports in the source VLANs.
outbound: Mirrors only packets sent by the ports in the source VLANs.
Usage guidelines
You can configure source VLANs only for local mirroring groups or remote source groups but not for
remote destination groups.
A VLAN can act as the source VLAN for only one mirroring group.
Examples
# Create local mirroring group 1, configure VLAN 1 as a source VLAN of the mirroring group, and
configure the mirroring group to monitor the bidirectional traffic of the ports in the VLAN.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 mirroring-vlan 1 both
# Create remote source group 2, configure VLAN 2 as a source VLAN of the mirroring group, and
configure the mirroring group to monitor the bidirectional traffic of the ports in the VLAN.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-source
[Sysname] mirroring-group 2 mirroring-vlan 2 both
Related commands
mirroring-group

mirroring-group monitor-port (interface view)

Use mirroring-group monitor-port to configure the port as the monitor port for a mirroring group.
Use undo mirroring-group monitor-port to remove the monitor port of a mirroring group.
Syntax
mirroring-group group-id monitor-port
undo mirroring-group group-id monitor-port
186

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: