Display Kernel Deadloop Configuration - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Related commands
reset kernel deadloop

display kernel deadloop configuration

Use display kernel deadloop configuration to display kernel thread deadloop detection configuration.
Syntax
In standalone mode:
display kernel deadloop configuration [ slot slot-number ]
In IRF mode:
display kernel deadloop configuration [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. Without this option, the command displays kernel
thread deadloop detection configuration for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. Without this option,
the command displays kernel thread deadloop detection configuration for the global active MPU. (In IRF
mode.)
Usage guidelines
This command is supported only on the default MDC.
Examples
# Display kernel thread deadloop detection configuration.
<Sysname> display kernel deadloop configuration
Thread dead loop detection: Enabled
Dead loop timer (in seconds): 60
Threads excluded from monitoring: 1
TID:
Table 56 Command output
Field
Dead loop timer (in seconds): n
Threads excluded from monitoring
Name
TID
15 Name: co0
Description
Time interval (in seconds) to identify a kernel thread deadloop. A kernel
thread deadloop occurs if a kernel thread runs more than n seconds.
Kernel threads excluded from kernel thread deadloop detection. This
field appears only if the monitor kernel deadloop exclude-thread
command is configured.
Kernel thread name.
Kernel thread number.
263