Source Ip - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Views
ICMP echo operation view, ICMP template view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you configure both the source interface command and the source ip command, the most recent
configuration takes effect.
The specified source interface must be up. Otherwise, no ICMP echo requests can be sent out.
Examples
# Specify the IP address of interface VLAN-interface 2 as the source IP address of ICMP echo request
packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] source interface vlan-interface 2
# In ICMP template view, specify the IP address of interface VLAN-interface 2 as the source IP address
of ICMP echo request packets.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] source interface vlan-interface 2
Related commands

source ip

source ip
Use source ip to configure the source IP address for probe packets.
Use undo source ip to remove the configured source address. The IP address of the interface that sends
a probe packet serves as the source IP address of the probe packet.
Syntax
source ip ip-address
undo source ip
Default
No source IP address is configured for probe packets.
Views
DLSw operation view, FTP operation view, HTTP operation view, ICMP echo operation view, path jitter
operation view, SNMP operation view, TCP operation view, UDP echo operation view, DHCP operation
view, UDP jitter operation view, voice operation view, any NQA template view
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents