Display Snmp-Agent Trap Queue - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
contact: Displays the system contact.
location: Displays the physical location of the device.
version: Displays the SNMP agent version.
Usage guidelines
If none of the parameters is specified, this command displays all SNMP agent system information.
Examples
# Display all SNMP agent system information.
<Sysname> display snmp-agent sys-info
The contact information of the agent:
The location information of the agent:
The SNMP version of the agent:
SNMPv3
Related commands
snmp-agent sys-info

display snmp-agent trap queue

Use display snmp-agent trap queue to display basic information about the trap queue, including the
queue size and number of traps in the queue.
Syntax
display snmp-agent trap queue
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
127