Display Nqa History - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies the destination port number for the operation, in the range of 1 to 65535.
Examples
# Configure the destination port number for the UDP echo operation as 9000.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
# In TCP template view, configure the destination port number for the UDP echo operation as 9000.
<Sysname> system-view
[Sysname] nqa template tcp tcptplt
[Sysname-nqatplt-tcp-tcptplt] destination port 9000

display nqa history

Use display nqa history to display the history records of NQA operations.
Syntax
display nqa history [ admin-name operation-tag ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
admin-name operation-tag: Displays the history records of an NQA operation. The admin-name
argument represents the name of the administrator who creates the NQA operation, and the
operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string
of 1 to 32 characters that cannot contain hyphens (-). If the two arguments are not specified, the
command displays the history records of all NQA operations.
Usage guidelines
The display nqa history command does not display the results or statistics of UDP jitter and voice
operations. Use the display nqa result command or the display nqa statistics command to verify the UDP
jitter and voice operations.
Examples
# Display the history records of the NQA operation with the administrator name administrator and the
operation tag test.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents