Display Logbuffer - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Log buffer: Enabled
Max buffer size 1024, current buffer size 512,
Current messages 0, dropped messages 0, overwritten messages 0
Log file: Enabled
Security log file: Enabled
Information timestamp format:
Loghost: Date
Other output destination: Date

display logbuffer

Use display logbuffer to display the state of the log buffer and the log information in the log buffer.
Syntax
In standalone mode:
display logbuffer [ reverse ] [ level severity | size buffersize | slot slot-number ] *
In IRF mode:
display logbuffer [ reverse ] [ level severity | size buffersize | chassis chassis-number slot slot-number ]
*
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
reverse: Displays log entries chronologically, with the most recent entry at the top. Without this keyword,
the command displays log entries chronologically, with the oldest entry at the top.
level severity: Specifies a severity level in the range of 0 to 7. Without this keyword, the command
displays log information for all levels.
Table 44 Log levels
Severity
value
0
1
2
Level
Description
The system is unusable. For example, the system
Emergency
authorization has expired.
Action must be taken immediately. For example, traffic on
Alert
an interface exceeds the upper limit.
Critical condition. For example, the device temperature
Critical
exceeds the upper limit, the power module fails, or the fan
tray fails.
206
Corresponding
keyword in
commands
emergency
alert
critical

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents