Info-Center Diagnostic-Logfile Quota; Info-Center Diagnostic-Logfile Directory - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Usage guidelines
The system saves diagnostic logs into the diagnostic log buffer, and outputs the buffered diagnostic logs
to the diagnostic log file at the specified interval.
Examples
# Configure the system to save diagnostic logs from the diagnostic log buffer to the diagnostic log file
every 600 seconds.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile frequency 600
Related commands
info-center diagnostic-logfile enable

info-center diagnostic-logfile quota

Use info-center diagnostic-logfile quota to set the maximum size of the diagnostic log file.
Use undo info-center diagnostic-logfile quota to restore the default.
Syntax
info-center diagnostic-logfile quota size
undo info-center diagnostic-logfile quota
Default
The maximum size of the diagnostic log file is 1 MB.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
size: Specifies the maximum size of the diagnostic log file, in MB. The value range is 1 to 10.
Examples
# Set the maximum size of the diagnostic log file to 6 MB.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile quota 6

info-center diagnostic-logfile directory

Use info-center diagnostic-logfile directory to configure the directory to save the diagnostic log file.
Syntax
info-center diagnostic-logfile directory dir-name
213

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents