HP FlexFabric 12500 Series Network Management And Monitoring Command Reference page 249

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Syntax
display rtm policy { active | registered } [ policy-name ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
active: Displays policies that are running.
registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If you do not specify a policy, the command displays all
monitor policies that are running or have been created.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID
PolicyName
507
test1
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 2
PolicyName
test1
test2
Table 50 Command output
Field
JID
PolicyName
Type
Event
TimeRegistered
User-role
TimeActive
Type
Event
TCL
INTERFACE
Type
Event
TCL
INTERFACE
CLI
INTERFACE
Description
Job ID. This field is available for the display rtm policy active command.
Monitor policy name.
Method for creating the policy:
TCL—The policy is configured by using Tcl.
CLI—The policy is configured from the CLI.
Source of the event specified in the policy.
Options include CLI, hotplug, interface, process, SNMP, SNMP_Notification, and
SYSLOG.
Time when the policy was created.
User roles for executing the monitor policy. To execute the monitor policy, an
administrator must have at least one of the displayed user roles.
Time when the policy started to execute. This field is available only for the display rtm
policy active command.
TimeActive
Apr 21 17:45:38 2012
TimeRegistered
Apr 21 16:33:00 2012
Apr 21 16:35:00 2012
241
User-role
network-admin
network-admin

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents