display kernel deadloop configuration
display kernel deadloop
monitor kernel deadloop enable
monitor kernel deadloop exclude-thread
monitor kernel starvation enable
Use monitor kernel starvation enable to enable kernel thread starvation detection.
Use undo monitor kernel starvation enable to disable kernel thread starvation detection.
In standalone mode:
monitor kernel starvation enable [ slot slot-number ]
undo monitor kernel starvation enable [ slot slot-number ]
In IRF mode:
monitor kernel starvation enable [ chassis chassis-number slot slot-number ]
undo monitor kernel starvation enable [ chassis chassis-number slot slot-number ]
Kernel thread starvation detection is disabled.
Predefined user roles
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do not
specify this option, the global active MPU is specified. (In IRF mode.)
Starvation occurs when a thread is unable to access shared resources.
This command enables the system to detect and report thread starvation. If a thread is not executed
within a specific interval, the system considers that a starvation has occurred, and outputs a starvation
Thread starvation does not impact system operation. A starved thread can automatically run when
certain conditions are met.
Inappropriate use of this command can cause service problems or system breakdown. Make sure you
understand the impact of this command on your network before you use it.
This command is supported only on the default MDC.