Snmp-Agent Group - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

The NMS and the SNMP agent use the same SNMP context.
•
Otherwise, a timeout message appears, indicating a communication failure between the NMS and
SNMP agent.
You can create a maximum of 20 SNMP contexts.
Examples
# Create SNMP context trillcontext.
<Sysname> system-view
[Sysname] snmp-agent context trillcontext
Related commands
display snmp-agent context

snmp-agent group

Use snmp-agent group to create an SNMP group and specify its access right.
Use undo snmp-agent group to delete an SNMP group.
Syntax
SNMPv1 and SNMP v2c:
snmp-agent group { v1 | v2c } group-name [ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent group { v1 | v2c } group-name
SNMPv3:
snmp-agent group v3 group-name { authentication | privacy } [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent group v3 group-name [ authentication | privacy ]
Default
No SNMP group exists.
SNMPv3 groups use the no authentication, no privacy security model if neither authentication nor
privacy is specified.
Views
System view
Predefined use roles
network-admin
mdc-admin
Parameters
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
group-name: Specifies an SNMP group name, a string of 1 to 32 case-sensitive characters.
authentication: Specifies the authentication without privacy security model for the SNMPv3 group.
136