Snmp Commands; Display Snmp-Agent Community - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

SNMP commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
The SNMP agent sends notifications (traps and informs) to inform the NMS of significant events, such as
link state changes and user logins or logouts. Unless otherwise stated, the trap keyword in the command
line includes both traps and informs.

display snmp-agent community

Use display snmp-agent community to display SNMPv1 or SNMPv2c community information.
Syntax
display snmp-agent community [ read | write ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
read: Displays information about SNMP read-only communities.
write: Displays information about SNMP read and write communities.
Usage guidelines
This command is supported only in non-FIPS mode.
If no keyword is specified, this command displays information about all SNMPv1 and SNMPv2c
communities that have been created. The communities include those configured with the snmp-agent
community command and those automatically created by the system for SNMPv1 and SNMPv2c users
that have been assigned to an existing SNMP group.
Examples
# Display information about all SNMPv1 and SNMPv2c communities.
<Sysname> display snmp-agent community
Community name: aa
Group name: aa
ACL:2001
Storage-type: nonVolatile
Context name: con1
112