Ping, Tracert, And System Debugging Commands; Debugging - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Ping, tracert, and system debugging
commands

debugging

Use debugging to enable debugging for a specific module.
Use undo debugging to disable debugging for a specific module.
Syntax
debugging { all [ timeout time ] | module-name [ option ] }
undo debugging { all | module-name [ option ] }
Default
Debugging functions are disabled for all modules.
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Enables all debugging functions.
timeout time: Specifies the timeout time for the debugging all command. When all debugging is enabled,
the system automatically executes the undo debugging all command after the timeout time. The time
argument is in the range of 1 to 1440 minutes.
module-name: Specifies a module by its name, such as arp or device. To display the current module
name, use the debugging ? command.
option: Specifies the debugging option for a specific module. The option number and content differ for
different modules. To display the supported options, use the debugging module-name ? command.
Usage guidelines
Output of debugging commands is memory intensive. To guarantee system performance, enable
debugging only for modules that are in an exceptional condition.
For more information about the debugging commands and debugging information about a specific
module, see debugging manuals of the module.
Examples
# Enable debugging for the device management module.
<Sysname> debugging dev
Related commands
display debugging
1