Snmp-Agent Trap Life - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Predefined user roles
network-admin
mdc-admin
Usage guidelines
Extended linkUp and linkDown notifications add interface description and interface type to the standard
linkUp/linkDown notifications for fast failure point identification.
When you use this command, make sure the NMS supports the extended linkup and linkDown
notifications.
Examples
# Enable extended linkUp/linkDown notifications.
<Sysname> system-view
[Sysname] snmp-agent trap if-mib link extended

snmp-agent trap life

Use snmp-agent trap life to configure the lifetime of notifications in the SNMP notification queue.
Use undo snmp-agent trap life to restore the default notification lifetime.
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
Default
The SNMP notification lifetime is 120 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Sets a lifetime in seconds, in the range of 1 to 2592000.
Usage guidelines
When congestion occurs, the SNMP agent buffers notifications in a queue. The notification lifetime sets
how long a notification can stay in the queue. A notification is deleted when its lifetime expires.
Examples
# Set the SNMP notification lifetime to 60 seconds.
<Sysname> system-view
[Sysname] snmp-agent trap life 60
Related commands
snmp-agent target-host
snmp-agent trap enable
150

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents