Display Process Cpu - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Field
STAT
PRI
TTY
HH:MM:SS
COMMAND

display process cpu

Use display process cpu to display CPU usage for all processes.
Syntax
In standalone mode:
display process cpu [ slot slot-number ]
In IRF mode:
display process cpu [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. Without this option, the command displays CPU
usage for all processes on the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. Without this option,
the command displays CPU usage for all processes on the global active MPU. (In IRF mode.)
Examples
# Display CPU usage for all processes.
<Sysname> display process cpu
CPU utilization in 5 secs: 16.8%; 1 min: 4.7%; 5 mins: 4.7%
JID
1
2
Description
State of a process:
•
R—Running.
•
S—Sleeping.
•
T—Traced or stopped.
•
D—Uninterruptible sleep.
•
Z—Zombie.
Priority of a process for scheduling.
TTY used by a process. It displays a hyphen (-) for non-default MDCs.
Running time since the latest start.
Name and parameters of a process. If square brackets ([ ]) exist in a process name, the
process is a kernel thread.
5Sec 1Min
0.0% 0.0%
0.0% 0.0%
5Min Name
0.0% scmd
0.0% [kthreadd]
277