Ntp-Service Max-Dynamic-Sessions - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Predefined user roles
network-admin
mdc-admin
Usage guidelines
To disable an interface on the device from synchronizing the peer device in the corresponding subnet or
disable the device from being synchronized by the peer device in the subnet corresponding to an
interface, execute the command on the interface.
Examples
# Disable VLAN-interface 1 from processing NTP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ntp-service inbound disable

ntp-service max-dynamic-sessions

Use ntp-service max-dynamic-sessions to set the maximum number of dynamic NTP sessions allowed to
be established locally.
Use undo ntp-service max-dynamic-sessions to restore the default.
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
Default
The maximum number of dynamic NTP sessions is 100.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Sets the maximum number of dynamic NTP associations allowed to be established, in the range
of 0 to 100.
Usage guidelines
A single device can have a maximum of 128 concurrent associations, including static associations and
dynamic associations. A static association refers to an association that a user has manually created by
using an NTP command, while a dynamic association is a temporary association created by the system
during operation.
Examples
# Set the maximum number of dynamic NTP associations allowed to be established to 50.
<Sysname> system-view
[Sysname] ntp-service max-dynamic-sessions 50
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents