Download  Print this page

Ntp-service Enable - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing.
Hide thumbs

Advertisement

Parameters
dscp-value: Sets a DSCP value in the range of 0 to 63 for IPv4 NTP packets.
Usage guidelines
The DSCP value is included in the ToS field of an IPv4 packet to identify the packet priority.
Examples
# Set the DSCP value for IPv4 NTP packets to 30.
<Sysname> system-view
[Sysname] ntp-service dscp 30

ntp-service enable

Use ntp-service enable to enable the NTP service.
Use undo ntp-service enable to disable the NTP service.
Syntax
ntp-service enable
undo ntp-service enable
Default
The NTP service is not enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable the NTP service.
<Sysname> system-view
[Sysname] ntp-service enable
ntp-service inbound disable
Use ntp-service inbound disable to disable an interface from processing NTP messages.
Use undo ntp-service inbound disable to restore the default.
Syntax
ntp-service inbound disable
undo ntp-service inbound disable
Default
An interface processes NTP messages.
Views
Interface view
96

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: