Read Me First or the ProCurve Switch vl Modules (J8763A, J8764A, J8765A, J8766A, J8768A, J8776A, and J9033A) For the J8768A and the J9033A modules, software release L.10.20 or later is required on your Switch 4200vl. For the J8766A module, software release L.11.xx or later is required on your Switch 4200vl. All other vl modules covered by this document or referenced above, are supported beginning with the original software release, L.10.01.
You can also register on the My ProCurve portal to receive a set of ProCurve switch manuals on CD-ROM. To register and request a CD go to www.procurve.com portal, click on My Manuals. Software Updates Are Free! ProCurve Networking provides free software updates on the ProCurve Web site for your Series 4200vl Switch.
Saving the Configuration After Installing or Exchanging a Module The following cases automatically result in a change to the running-configuration on your switch: If you replace a module with another module of a different type and then reboot the switch ■...
Mini-GBIC Operation Notes Revision “B” mini-GBICs only. This product requires ProCurve revision “B” or later mini-GBICs (product number ends with the letter “B” or “C”, for example J4858B, J4859C). These switches do not support revision “A” mini-GBICs. Use only genuine ProCurve mini-GBICs. Non-ProCurve mini-GBICs are not supported. Use of genuine products ensures that your network maintains optimal performance and reliability.