Nqa - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Parameters
ip-address: Specifies the IP address of the next hop.
Examples
# Specify the next hop IP address as 10.1.1.1 for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1

nqa

Use nqa to create an NQA operation and enter its view.
Use undo nqa to remove the operation.
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
Default
No NQA operation is created.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
admin-name: Specifies the name of the administrator who creates the NQA operation, a case-insensitive
string of 1 to 32 characters that cannot contain hyphens (-).
operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters that
cannot contain hyphens (-).
all: Removes all NQA operations.
Usage guidelines
If the operation type has been configured for the operation, this command directly places you to NQA
operation view.
Examples
# Create an NQA operation with administrator name admin and operation tag test, and enter NQA
operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents