Download Print this page

HP FlexFabric 12500 Series Network Management And Monitoring Command Reference: Reaction Checked-element Mos

Routing.
Hide thumbs

Advertisement

reaction checked-element mos

Use reaction checked-element mos to configure a reaction entry for monitoring the MOS value in the
voice operation.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction
item-number
[ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring the MOS value is configured.
Views
Voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.
threshold-value: Specifies threshold range.
upper-threshold: Specifies the upper limit in the range of 1 to 500.
lower-threshold: Specifies the lower limit in the range of 1 to 500. It must not be greater than the upper
limit.
action-type: Specifies what action to be triggered. The default action is none.
none: Specifies the action of only displaying results on the terminal display.
trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the NMS.
Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use undo
reaction to delete the entry first and reconfigure a new one.
For the MOS threshold, the number is expressed in three digits representing ones, tenths, and hundredths.
For example, to express a MOS threshold of 1, enter 100.
Examples
# Create reaction entry 1 for monitoring the MOS value of the voice operation, setting the upper limit to
2 and lower limit to 1. Before the NQA operation starts, the initial state of the reaction entry is invalid.
After the operation, the MOS value is checked against the threshold range. If it exceeds the upper limit,
the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to
below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to
the NMS.
<Sysname> system-view
[Sysname] nqa entry admin test
checked-element
mos
56
threshold-value
upper-threshold
lower-threshold

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: