Display Logbuffer Summary - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Field
Max buffer size
Actual buffer size
Dropped messages
Overwritten messages
Current messages
Related commands
info-center logbuffer
reset logbuffer

display logbuffer summary

Use display logbuffer summary to display the summary of the log buffer.
Syntax
In standalone mode:
display logbuffer summary [ level severity | slot slot-number ] *
In IRF mode:
display logbuffer summary [ level severity | chassis chassis-number slot slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
level severity: Specifies a severity level in the range of 0 to 7. Without this keyword, the command
displays log information of all levels in the log buffer. For more information about log levels, see
44.
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument specifies the ID of the member device. The slot-number argument specifies the slot number of
the card. (In IRF mode.)
Examples
# (In standalone mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
SLOT EMERG ALERT
0
CRIT ERROR
0
0
0
0
Description
Maximum buffer size supported by the device.
Maximum buffer size configured by using the
info-center logbuffer size command.
Number of dropped messages.
Number of overwritten messages.
Number of current messages.
WARN NOTIF
INFO DEBUG
0
0
0
208
0
Table

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents