Monitor Process - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Usage guidelines
If a thread is not executed within the specified interval, the system considers that a starvation has
occurred, and outputs a starvation message.
Inappropriate use of this command can cause service problems or system breakdown. Make sure you
understand the impact of this command on your network before you use it.
This command is supported only on the default MDC.
Examples
# Set the interval for identifying a kernel thread starvation to 120 seconds.
<Sysname> system-view
[Sysname] monitor kernel starvation time 120
Related commands
• display kernel starvation
display kernel starvation configuration
•
monitor kernel starvation enable
•
monitor kernel starvation exclude-thread
•

monitor process

Use monitor process to display process statistics.
Syntax
In standalone mode:
monitor process [ dumbtty ] [ iteration number ] [ slot slot-number ]
In IRF mode:
monitor process [ dumbtty ] [ iteration number ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays process statistics in descending
order of CPU usage without refreshing statistics. If you do not specify this keyword, the command
displays statistics for the top 10 processes in descending order of CPU usage in an interactive mode, and
refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you specify
the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword nor the
number argument is specified, there is no limit to the display times and process statistics are refreshed
every 5 seconds.
slot slot-number: Specifies a card by its slot number. Without this option, the command displays process
statistics for the active MPU. (In standalone mode.)
292