Display Nqa Result - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Monitored
performance
metric
RTT
jitter-DS/jitter-SD
OWD-DS/OWD-SD
packet-loss
ICPIF
MOS

display nqa result

Use display nqa result to display the most recent result of the specified NQA operation.
Syntax
display nqa result [ admin-name operation-tag ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
admin-name operation-tag: Displays the most recent result of an NQA operation. The admin-name
argument represents the name of the administrator who creates the NQA operation. The operation-tag
argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32
characters that cannot contain hyphens (-). If these two arguments are not specified, the command
displays the most recent result of all NQA operations.
Threshold
Collect data in
type
Probes after the
consecutive
operation starts.
Packets sent after
accumulate
the operation
starts.
average
N/A
Packets sent after
the operation
accumulate
starts.
average
N/A
Packets sent after
N/A
the operation
starts.
Packets sent after
accumulate
the operation
starts.
N/A
N/A
N/A
N/A
Checked Num
Number of
completed probes.
Number of sent
packets.
N/A
Number of sent
packets.
N/A
Number of sent
packets.
Number of sent
packets.
N/A
N/A
21
Over-threshold Num
Number of probe failures.
Number of packets with
round-trip time exceeding
threshold.
N/A
Number of packets with
the one-way jitter
exceeding the threshold.
N/A
Number of packets with
the one-way delay
exceeding the threshold.
Total packet loss.
N/A
N/A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents