Download  Print this page

Snmp-agent - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing.
Hide thumbs

Advertisement

[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] enable snmp trap updown
Related commands
snmp-agent target-host
snmp-agent trap enable

snmp-agent

Use snmp-agent to enable the SNMP agent.
Use undo snmp-agent to disable the SNMP agent.
Syntax
snmp-agent
undo snmp-agent
Default
SNMP agent is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The snmp-agent command is optional for an SNMP configuration task. The SNMP agent is automatically
enabled when you execute any command that begins with snmp-agent except for the snmp-agent
calculate-password command.
Examples
# Enable the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent
snmp-agent calculate-password
Use snmp-agent calculate-password to convert a plaintext key to a ciphertext key for authentication or
encryption in SNMPv3.
Syntax
In non-FIPS mode:
snmp-agent calculate-password plain-password mode { md5 | sha } { local-engineid |
specified-engineid engineid }
In FIPS mode:
131

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: