Download  Print this page

HP FlexFabric 12500 Series Network Management And Monitoring Command Reference: Snmp-agent Community

Routing.
Hide thumbs

Advertisement

snmp-agent calculate-password plain-password mode sha { local-engineid | specified-engineid
engineid }
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
plain-password: Specifies a plaintext authentication or privacy key.
mode: Specifies the same authentication mode as configured in the snmp-agent usm-user v3 command.
MD5 is faster than SHA- 1 , while SHA- 1 provides higher security than MD5.
md5: Converts the plaintext authentication key to a ciphertext key for MD5 authentication, or
converts the plaintext privacy key to a ciphertext key for AES or DES encryption used in conjunction
with MD5.
sha: Converts the plaintext authentication key to a ciphertext key for SHA- 1 authentication, or
converts the plaintext privacy key to a ciphertext key for AES or DES encryption used in conjunction
with SHA- 1 authentication.
local-engineid: Uses the local engine ID to calculate the ciphertext key. You can configure the local
engine ID by using the snmp-agent local-engineid command.
specified-engineid engineid: Uses a user-defined engine ID to calculate the ciphertext key. The engineid
argument specifies an SNMP engine ID as a hexadecimal string. It must comprise an even number of
hexadecimal characters, in the range of 10 to 64. All-zero and all-F strings are invalid.
Usage guidelines
Make sure the SNMP agent is enabled before you execute the snmp-agent calculate-password
command.
Use this command to calculate ciphertext authentication and privacy keys when you create SNMPv3
users by using the snmp-agent usm-user v3 command.
The converted key is valid only under the engine ID specified for key conversion.
Examples
# Use the local engine and the SHA- 1 algorithm to convert the plaintext key authkey to a ciphertext key.
<Sysname> system-view
[Sysname] snmp-agent calculate-password authkey mode sha local-engineid
The encrypted key is: 09659EC5A9AE91BA189E5845E1DDE0CC
Related commands
snmp-agent local-engineid
snmp-agent usm-user v3

snmp-agent community

Use snmp-agent community to configure an SNMP community.
Use undo snmp-agent community to delete an SNMP community.
132

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: