Statistics Max-Group - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Views
Any operation view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies the interval in minutes, in the range of 1 to 35791394.
Usage guidelines
NQA collects statistics for operations completed within a specific period. The statistics form a statistics
group. To view information about the statistics groups, use the display nqa statistics command.
Examples
# Configure the system to collect the ICMP echo operation statistics at 2-minute intervals.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics interval 2

statistics max-group

Use statistics max-group to configure the maximum number of statistics groups that can be saved.
Use undo statistics max-group to restore the default.
Syntax
statistics max-group number
undo statistics max-group
Default
A maximum of two statistics groups can be saved.
Views
Any operation view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies the maximum number of statistics groups, in the range of 0 to 100. To disable statistics
collection, set the value to 0.
Usage guidelines
When the maximum number of statistics groups is reached and a new statistics group is to be saved, the
earliest statistics group is deleted.
Examples
# Configure the NQA to save up to 5 statistics groups for the ICMP operation.
73