Download Print this page

HP FlexFabric 12500 Series Network Management And Monitoring Command Reference: Probe Timeout

Routing.
Hide thumbs

Advertisement

Parameters
packet-number: Specifies the number of packets to be sent per probe. Available ranges:
10 to 1000 for the UDP jitter or path jitter operation.
10 to 60000 for the voice operation.
Examples
# Configure the UDP jitter probe to send 100 packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100
probe packet-timeout
Use probe packet-timeout to configure the timeout time for waiting for a response in the UDP jitter, path
jitter, or voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
Default
The response timeout time in the UDP jitter or path jitter operation is 3000 milliseconds, and the response
timeout time in the voice operation is 5000 milliseconds.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
packet-timeout: Specifies the timeout time in milliseconds for waiting for a response in the UDP jitter, path
jitter, or voice operation. The value is in the range of 10 to 3600000.
Examples
# Configure the timeout time for waiting for a response in the UDP jitter operation as 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100

probe timeout

Use probe timeout to specify the probe timeout time.
Use undo probe timeout to restore the default.
51

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

   Related Content for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: