Mac-Vlan Trigger Enable; Port Pvid Forbidden - HPE FlexNetwork 5130 EI Series Command Reference Manual

mac-vlan trigger enable

Use mac-vlan trigger enable to enable dynamic MAC-based VLAN assignment on a port.
Use undo mac-vlan trigger enable to disable dynamic MAC-based VLAN assignment on a
port.
Syntax
mac-vlan trigger enable
undo mac-vlan trigger enable
Default
Dynamic MAC-based VLAN assignment is disabled on a port.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
VLAN assignment for a port is triggered only when the source MAC address of its received packet
exactly matches the MAC address in a MAC-to-VLAN entry.
Examples
# Enable dynamic MAC-based VLAN assignment on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-vlan trigger enable
Related commands
mac-vlan mac-address

port pvid forbidden

port pvid forbidden
Use port pvid forbidden to disable a port from forwarding packets that fail the exact MAC
address match in its PVID.
Use undo port pvid forbidden to restore the default.
Syntax
port pvid forbidden
undo port pvid forbidden
Default
When a port receives packets whose source MAC addresses fail the exact MAC address match, the
port forwards them in its PVID.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
190