Reaction Checked-Element Probe-Fail (For Trigger); Reaction Checked-Element Rtt - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

[Sysname-nqa-admin-test-icmp-echo] reaction 2 checked-element probe-fail threshold-type
consecutive 10 action-type trap-only

reaction checked-element probe-fail (for trigger)

Use reaction checked-element probe-fail to configure a reaction entry for monitoring probe
failures.
Use undo reaction to delete a reaction entry.
Syntax
reaction
consecutive-occurrences action-type trigger-only
undo reaction item-number
Default
No reaction entries for monitoring probe failures exist.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
Predefined user roles
network-admin
Parameters
item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.
threshold-type: Specifies a threshold type.
consecutive consecutive-occurrences: Checks the maximum number of consecutive probe failures,
in the range of 1 to 16.
action-type: Specifies what action to be triggered.
trigger-only: Triggers other modules to react to certain conditions.
Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use
the undo reaction command to delete the entry, and then configure a new one.
Examples
# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is
triggered.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type tcp
[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
Related commands
track (High Availability Command Reference)

reaction checked-element rtt

Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip
time.
item-number checked-element probe-fail
67
threshold-type consecutive