Ground And Power Connections; Chassis Ground Interface; Figure 3-8. Chassis Ground Interface - Comtech EF Data CDM-760 Installation And Operation Manual

Rear Panel Connections
CDM-760 Advanced High-Speed Trunking Modem
3.3

Ground and Power Connections

3.3.1 Chassis Ground Interface

Use the #10-32 stud, located adjacent to the power interface (Figure 3-8), for connecting a
common chassis ground among equipment.
CAUTION
CORRECT GROUNDING PROTECTION IS REQUIRED TO PREVENT PERSONAL INJURY
AND EQUIPMENT DAMAGE. YOU MUST MAKE SURE THE GROUND STUD ON THE REAR
PANEL OF THE UNIT IS ALWAYS CONNECTED TO PROTECTIVE EARTH.
The AC power interface provides the safety ground.

Figure 3-8. Chassis Ground Interface

3–13
Revision 4
MN-CDM760