Comtech EF Data CDM-760 Installation And Operation Manual page 392

Appendix H
CDM-760 Advanced High-Speed Trunking Modem
The operands available for Carrier ID configuration and operation through CDM-760 Serial-based
Remote Product Management are identified in the following table – details on using these CID-
specific remote commands and queries are explicitly defined in Chapter 8.
Operand Description
LAT Sets or returns device Longitude.
LNG Sets or returns device Latitude.
MSG Sets or returns the assigned Custom Message.
MUT Sets or returns the mute mode (operational state).
PHN Sets or returns the assigned Telephone Number.
H–11
Revision 4
MN-CDM760