European Union Low Voltage Directive (Lvd) (2006/95/Ec); European Union Rohs Directive (2002/95/Ec); European Union Telecommunications Terminal Equipment Directive (91/263/Eec); Ce Mark - Comtech EF Data CDM-760 Installation And Operation Manual

Preface
CDM-760 Advanced High-Speed Trunking Modem
CAUTION
TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY THESE
INSTRUCTIONS:
•
Use coaxial cable that is of good quality for connections to the L-Band Type 'N' Rx
(receive) female connector.
• Use Type 'D' connectors that have back-shells with continuous metallic shielding. Type
'D' cabling must have a continuous outer shield (either foil or braid, or both). The shield
must be bonded to the back-shell.
•
Operate the unit with its cover on at all times.

European Union Low Voltage Directive (LVD) (2006/95/EC)

Symbol Description
<HAR> Type of power cord required for use in the European Community.
CAUTION:
!
ACHTUNG:
Symbol
For additional symbols, refer to Warnings, Cautions and Notes listed earlier in this
Preface.

European Union RoHS Directive (2002/95/EC)

This unit satisfies (with exemptions) the requirements specified in the European Union Directive
on the Restriction of Hazardous Substances in Electrical and Electronic Equipment (EU RoHS,
Directive 2002/95/EC).
European Union Telecommunications Terminal Equipment Directive
(91/263/EEC)
In accordance with the European Union Telecommunications Terminal Equipment Directive
91/263/EEC, the unit should not be directly connected to the Public Telecommunications
Network.

CE Mark

Comtech EF Data declares that the unit meets the necessary requirements for the CE Mark.
Double-pole/Neutral Fusing
Zweipolige bzw. Neutralleiter-Sicherung
International Symbols
Definition
Alternating Current
Fuse
xxiv
Symbol
Protective Earth
Chassis Ground
Revision 4
MN-CDM760
Definition