Header Compression; Fast Options - Comtech EF Data CDM-760 Installation And Operation Manual

Advanced high-speed trunking modem
Table of Contents

Advertisement

Appendix F
CDM-760 Advanced High-Speed Trunking Modem
F.3.3

Header Compression

The High-Speed Packet Processor incorporates industry-leading header compression for
Ethernet Layer 2 or Layer 3 IP traffic. Header compression can reduce the 40-byte IP/UDP/RTP
header to as little as 1 byte; for TCP/IP, the 40-byte header is reduced to as little as 3 bytes.
For applications such as Voice-over-IP (VoIP), header compression can provide bandwidth
savings exceeding 60%. For example, the 8 kbps G.729 voice codec requires 24 kbps of IP
bandwidth once encapsulated into an IP/UDP/RTP datagram. With header compression, the
same voice call needs about 8.5 kbps – a saving of almost 65%.
In addition, bandwidth requirements for typical Web/HTTP traffic can be reduced by 10% or
more with TCP/IP header compression.
F.3.4

FAST Options

No FAST options are associated with the High-Speed Packet Processor. Once installed and
enabled, the Packet Processor is already configured for full operation of Routing, QoS, and
Header Compression at the full rate of the modem.
F–19
Revision 4
MN-CDM760

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDM-760 and is the answer not in the manual?

Table of Contents

Save PDF