Admin | Fast - Comtech EF Data CDM-760 Installation And Operation Manual

Ethernet Interface Operation
CDM-760 Advanced High-Speed Trunking Modem

7.4.4.2.4 Admin | FAST

•
Sect. 1.2.5 On-site Operational Upgrades
• Chapter 5. FAST ACTIVATION PROCEDURE
•
Chapter 6. FRONT PANEL OPERATION
The CDM-760 has a number of optional features that may be activated after the unit's purchase.
Fully Accessible System Topology (FAST) Access Codes are register-specific authorization codes
that you may purchase from Comtech EF Data, and then activate in the unit using this page.
Contact Comtech EF Data Product Support to order the desired options and obtain your unique
FAST Access Codes.
FAST Upgrade
When you obtain a FAST access code from Comtech EF Data, it will be for a specific option
register. Carefully enter each register-specific 20-character FAST access code in sequence, and
then click [Enter#] when done. The modem then displays a message on this page to indicate
whether or not the codes were accepted or if the upgrade was successful.
If you enter an invalid FAST code, the modem will reject the code and will not accept
machine-to-machine FAST codes for 15 minutes. You may enter FAST codes locally
from the modem front panel during this timeframe.
Demo Mode
• Time Remaining – FAST Options Demo Mode allows access to ALL CDM-760 FAST options
for 30 calendar days. This field displays the remaining time in days, hours, minutes, and
seconds.
•
Use the Demo Mode drop-down list to select Demo-Mode as Off or On. Click [Update Demo
Mode] to execute the selection.
If an option is running that is not an activated (purchased) FAST Option at the time Demo Mode
is turned off, the modem will revert to all settings that were last valid before the modem was
Figure 7-10. Admin | FAST Page
7–17
Revision 4
MN-CDM760