Use The Http Interface To Perform The Ethernet Ftp Upload Procedure - Comtech EF Data CDM-760 Installation And Operation Manual

Updating Firmware
CDM-760 Advanced High-Speed Trunking Modem
Use the Serial Remote Control Interface – Execute one of the following queries:
•
o Abbreviated – <0/SWR? (displays firmware versions)
o Detailed – <0/FRW?1 (for Image 1) or <0/FRW?2 (for Image 2) (displays complete
firmware load information)
4.4.3 Use the HTTP Interface to Perform the Ethernet FTP Upload
Procedure
For Firmware Version 1.4.1 and later, the Administrator may use the Admin | Upgrade page to
manage the CDM-760 Firmware Upgrade process.
Do the steps displayed in the Firmware Upgrade section of this page to transfer the extracted
firmware update image ZIP file (available from
Product Support) from the User PC to the modem's Flash memory.
Note that Steps 6 through 8 prompt you to use the Firmware Image Config section of this page
to finalize the process.
Figure 4-1. HTTP Interface Admin | Upgrade page
4–12
www.comtechefdata.com
Revision 4
MN-CDM760
or Comtech EF Data