Comtech EF Data CDM-760 Installation And Operation Manual page 89

FAST Activation Procedure
CDM-760 Advanced High-Speed Trunking Modem
2. To view currently installed FAST features, log in to the CDM-760 HTTP Interface and open
the 'Status | Info' page. The FAST information appears in the Installed Options and
Uninstalled Options sections of this page, as this example shows:
3. Contact Comtech EF Data Product Support to order features:
a. Provide the modem's 9-digit Baseboard Serial Number to the representative.
b. Identify and purchase the desired FAST option(s).
c. Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the FAST
option activation instructions.
4. Enter the FAST Access Code(s):
a. Log in to the CDM-760 HTTP Interface, and open the 'Admin | FAST' page:
b. Enter the register-specific 20-digit FAST Access Code(s) carefully into the associated text
field(s) ("Option" as used here is the same as "Register"). The modem responds with
"Configured Successfully" if the FAST upgrade is accepted; the modem then resets to its
newly-incorporated default configuration. However, if an invalid code is entered, the
message "Invalid!" will display in the text field. Repeat the FAST Access Code entry
procedure. Should the code entry error persist, contact Comtech EF Data Product
Support for further assistance.
5–4
Revision 4
MN-CDM760