Comtech EF Data CDM-760 Installation And Operation Manual page 340

Appendix F
CDM-760 Advanced High-Speed Trunking Modem
c) On the bottom line of the Interface screen, use the  arrow keys to navigate to the
Packet Processor column. Press ENTER to proceed:
GBEI1
Off
d) Use the arrow keys to select Packet Processor operation as Enabled. Press ENTER to
proceed.
Packet Processor: nabled
The modem will boot of the High-Speed Packet Processor card:
Conversely, if the Packet Processor is Enabled and you set the Packet Processor
interface as Disabled:
2. Once you enable the Packet Processor operation and reboot the modem, you should use
the CDM-760 HTTP Interface for Packet Processor-related modem operations.
GBEI2 Optical
Off NONE
Packet Processor card booting...
Please wait
Packet Processor card booting...
Please wait
Make sure that your rear panel Ethernet traffic and M&C cabling and
connections have been made for non-Packet Processor operation.
PacketProcessor
Uisabled
F–11
Revision 4
MN-CDM760
( )
