Configuring Sip Accounts - Tieline Merlin PLUS User Manual

Configuring SIP Accounts

14.2
Getting Started
Up to 6 SIP accounts can be configured in the codec and registering codecs for SIP connectivity is
simple. First, select the SIP server to which you will register your codec. On a LAN this may be
your own server, or it could be one of the many internet servers available. When you register an
account with a SIP server you will be provided with:
·
The SIP registrar and Proxy Server details.
·
An authorized user or username (often the same as a SIP number).
·
A password.
·
Domain details.
·
Realm details (in most cases leave blank).
·
Registration Timeout (this shouldn't need to be adjusted from the default setting).
Important Notes:
·
In most situations it is best to configure a SIP account when the codec is configured
with a public IP address.
·
Each SIP account can only be mapped to a single SIP interface, i.e. SIP1 (ETH1) or
SIP 2 (ETH2).
·
Up to 6 SIP accounts can be added to the codec.
·
It is also possible to
Toolbox Web-GUI.
Adding a SIP Account
1. Press the the SETTINGS
2. Navigate to Accounts and press the
3. Select an account which is Not Configured and press
4. Select Edit and then press
© Tieline Pty. Ltd. 2017
Merlin PLUS WNET Manual v2.0
add and register a SIP account
button, then navigate to SIP and press the
button.
to individually select and enter SIP server account details.
to your codec using the HTML5
button.
.
61