Load And Dial Custom Programs; Disconnecting A Connection; Redialing A Connection; Configuring Auto Reconnect - Tieline Merlin PLUS User Manual

80 Merlin PLUS WNET Manual v2.0

Load and Dial Custom Programs

21.7
Custom programs stored on the codec are simple to load and dial from the codec front panel.
1. Press the HOME
2. Use the navigation buttons to select Programs and press the
3. Use the up
press the CONNECT
4. The Wait Connecting screen appears during the connection process and then connection
details are displayed.
21.8

Disconnecting a Connection

1. Press the red DISCONNECT
connection.
2. Use the right
button to confirm the disconnection.
21.9

Redialing a Connection

Press the CONNECT
menus accessed via the Connect > IP, ISDN or POTS screens).
Manually dialed connections are saved as programs - retaining all the dialing and configuration
information programmed into the codec. A program is identified in the Recent Programs redial
screen using either a previously entered name, or by a dialing address or number (manually dialed
connections).
21.10

Configuring Auto Reconnect

Auto Reconnect is disabled by default. When enabled, the dialing codec attempts to reconnect if
data is temporarily lost over a connection.
Important Note: When Auto Reconnect is enabled, the dialing codec will continue to
attempt a connection with the remote codec until Disconnect is pressed either on the
dialing codec's keypad, or in the web-GUI.
Auto Reconnect using IP
1. Press the HOME
and press the
2. Select the IP Session mode you are using to connect.
3. Select Setup and press
4. Navigate to Auto Recon and press
button to return to the Home screen.
and down navigation buttons to select the program you want to use, then
button to load the program and make a connection.
button on the numeric KEYPAD at any time to hangup a
navigation button to select Yes and press the DISCONNECT
button from any codec menu to redial previous connections (except
button to return to the Home screen, select Connect, then select IP
button.
.
to toggle between Enabled and Disabled.
button.
button or the
© Tieline Pty. Ltd. 2017