Tieline Merlin PLUS User Manual page 250

250 Merlin PLUS WNET Manual v2.0
Note: Connection-related rules are not displayed in Answer only programs.
Configure Rules with the Rules Panel
To view rules options:
1. Open the Toolbox HTML5 Web-GUI and click Control in the Menu Bar, then click Rules to
display the Rules panel.
2. Click Add New Rule.
3. Click to select the appropriate rule for your requirements. See the
Using the Toolbox HTML5 Web-GUI
Note: When rules have been configured previously they are displayed when the Rules panel is
opened.
Rule 1: Toggle a Control Port Input to Connect and Disconnect a Program
This rule is used to connect and disconnect a selected program when a control port input is toggled.
1. Click the rule in the Rules panel titled Connect and disconnect a program when an
input is toggled.
2. Click the drop-down Input arrow and select the control port input which will trigger program
connection and disconnection.
3. Click the drop-down Program arrow to select the program to be connected.
for an explanation of the action each rule can perform.
Rules panel section in
© Tieline Pty. Ltd. 2017