Configuring Sip Accounts - Tieline Merlin PLUS User Manual

56 Merlin PLUS User Manual v2.0

Configuring SIP Accounts

14.2
Getting Started
Up to 6 SIP accounts can be configured in the codec and registering codecs for SIP connectivity is
simple. First, select the SIP server to which you will register your codec. On a LAN this may be
your own server, or it could be one of the many internet servers available. When you register an
account with a SIP server you will be provided with:
·
The SIP registrar and Proxy Server details.
·
An authorized user or username (often the same as a SIP number).
·
A password.
·
Domain details.
·
Realm details (in most cases leave blank).
·
Registration Timeout (this shouldn't need to be adjusted from the default setting).
Important Notes:
·
In most situations it is best to configure a SIP account when the codec is configured
with a public IP address.
·
Each SIP account can only be mapped to a single SIP interface, i.e. SIP1 (ETH1) or
SIP 2 (ETH2).
·
Up to 6 SIP accounts can be added to the codec.
·
It is also possible to
Toolbox Web-GUI.
Adding a SIP Account
1. Press the the SETTINGS
2. Navigate to Accounts and press the
3. Select an account which is Not Configured and press
4. Select Edit and then press
add and register a SIP account
button, then navigate to SIP and press the
button.
to individually select and enter SIP server account details.
to your codec using the HTML5
button.
.
© Tieline Pty. Ltd. 2017